GE Vivid S6 N - 10-4-2-2 Peripheral;Option Checks; 10-4-3 Input Power Checks; 10-4-3-1 Mains Cable Inspection

GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
10-8 Section 10-4 - System Maintenance
PRELIMINARY
10-4-2-2 Peripheral/Option Checks
If any peripherals or options are not part of the system configuration, the check can be omitted. Refer to
the Vivid S5 N or Vivid S6 N User Manual for a list of approved peripherals/options.
10-4-3 Input Power Checks
10-4-3-1 Mains Cable Inspection
Table 10-5 GE Approved Peripheral/Hardware Option Functional Checks
Step Item Description
1
B/W Printer Verify hardcopy output of the B/W video page printer. Clean heads and covers if necessary.
2
Color Printer Verify hardcopy output of the Color video page printer. Clean heads and covers if necessary.
3
InkJet Printer Verify hardcopy output of the InkJet page printer. Clean heads and covers if necessary.
4
Network
Printer
Verify hardcopy output. Clean covers if necessary.
5
DICOM Verify that DICOM is functioning properly. Send an image to a DICOM device.
7
InSite
Verify that InSite is functioning properly. Ensure two-way remote communications.
(Warranty & Contract Customers only)
8
ECG Verify basic operation with customer.
9
DVD-CDRW Verify that the DVD-CDRW is functioning properly.
10
MOD Verify that the MOD is functioning properly.
Table 10-6 Mains Cable Inspection
Step Item Description
1
Unplug Cord Disconnect the mains cable from the wall outlet and from the system.
2
Mains Cable Inspect the mains cable and its connectors for any damage.
3
Terminals
Verify that the LINE, NEUTRAL and GROUND wires are properly attached to the terminals,
and that no strands may cause a short circuit.
4
Inlet Connector Verify that the Inlet connector retainer is functional.