GE Vivid S6 N - 8-2-5 Left Rear Cover Replacement Procedures; 8-2-5-1 Tools; 8-2-5-2 Preparations; 8-2-5-3 Left Rear Cover Removal Procedure

GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-13
PRELIMINARY
8-2-5 Left Rear Cover Replacement Procedures
8-2-5-1 Tools
Use the appropriate Phillips-type screwdrivers, as indicated in the left rear cover replacement
procedures.
8-2-5-2 Preparations
Shut down the Vivid S5 N or Vivid S6 N ultrasound unit, as described in 4-2-3 "Power Shut Down" on
page 4-7.
8-2-5-3 Left Rear Cover Removal Procedure
1) Remove the left side cover, as described in “Left Side Cover Removal Procedure” on page 8-6.
2) Remove the Basket (as described in the “Basket Removal Procedure” on page 8-20) and/or the
Tray (as described in the “Tray Removal Procedure” on page 8-22), as applicable.
NOTE: The left rear cover is secured to the base of the main assembly frame by a screw through a
securing tab on the inner left side of the cover, as illustrated below.
3) Loosen and remove the screw from the securing tab on the inner side of the left cover
(see Figure 8-15).
Figure 8-14 Position of Left Rear Cover and Securing Screw
Left Rear Cover
Screw
(through securing tab)
Screw