GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 6 - Service Adjustments 6-5
PRELIMINARY
6-1-2-5 Blue Tint “2” Adjustment Procedure
NOTE: Systems with BT11 installed software have a Blue Tint “2” option that enables blue tint enhancement.
This option can be switched off if preferred by the user.
NOTE: This option applies to the following LCD monitor installations:
System: Vivid S5 N
Monitor: NEC 15-2
System: Vivid S6 N
Monitor: Hitachi 17-3
To identify which monitor is installed on the system:
1.) Log on as Administrator.
2.) Press Config > About > and select the HwVersion tab.
The monitor type appears under Module Name and the part number indicates the monitor type
- see Figure 6-6.
Figure 6-6 Identifying Monitor Type
To Next Page
Loading...
