GE Vivid S6 N - 3-6-2 Service Screen Set-up; 3-6-2-1 Overview; 3-6-2-2 Open Service Screen

GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 3 - System Setup 3-85
PRELIMINARY
3-6-2 Service Screen Set-up
3-6-2-1 Overview
The Service Screen gives you access to:
• Keyboard Setups
• Printer Setup
• Disable TCPIP filtering
NOTE: The Disable TCPIP Filtering option should only be used for Troubleshooting procedures, after which it
is recommended to return immediately to the TCPIP Filtering enabled state.
3-6-2-2 Open Service Screen
1.) Press CONFIG
(F2) and log on as Adm, see ‘Log On to the System as ADM” on page 4-10.
2.) Select SERVICE
to view the Service Screen, see Figure 3-95 below.
Figure 3-95 Service Screen (Example)