GE Vivid S6 N - 8-8-9 Performing a Complete System Back-up; 8-8-10 How to Restore User-defined Presets

GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-233
PRELIMINARY
8-8-9 Performing a Complete System Back-up
8-8-10 How to Restore User-defined Presets
For details, refer to “Restoring System Configuration from an MO Disk” on page 4-17.
NOTICE
IMPORTANT: Contact the customer and request that a full incremental back-up be performed prior to
upgrade. If necessary, refer them to the Vivid S5 N or Vivid S6 N User Manual. Ask for removal (delete)
of un-necessary patient information, so that the back-up process will require minimal time.
Remind customers that GE strongly recommends that periodic back-ups of their Archive be performed.
This routine back-up process will assure the retention of all the information that is temporarily saved
into the local Archive (hard-disk). The permanent Archive is the backed-up Archive on the variety of
medias.
Do not proceed with the upgrade process if a complete incremental back-up process has not
been performed. Contact the On-Line Center to resolve any back-up process issues, before
proceeding with the upgrade. Ignore this note if back-up of patient information is not required, as per
the customer’s instructions.