GE Vivid S6 N - 3-6-3-3 Virtual Printing (Optional)

GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 3 - System Setup 3-93
PRELIMINARY
3-6-3-3 Virtual Printing (Optional)
Virtual printing is not configurable. The functionality of virtual printing provides the ability to print to a
specific printer, even though it is not physically connected.
Once the printer has been re-connected again, all the spooled print jobs will be printed out
automatically.
Sometimes this feature is device dependent. Therefore, in order to initiate the manual “print of all
spooled jobs” process, proceed as described below.
1.) Press <ALT> + P.
The Printers and Faxes window is displayed.
2) Right-click on the destination virtual printer (see Figure 3-105) and select Open.
The Virtual Printer Job Queue window is displayed.
3.) From the queued Print Jobs, right-click and select Cancel to clear any spooled jobs not required.
Figure 3-105 Printers and Faxes Window
Figure 3-106 Virtual Printer Job Queue Window