GE Vivid S6 N - 7-2-4 Diagnostic Test Window Menu Options; 7-2-4-1 Full System Test; 7-2-4-1-1 Full System Test (FE and BEP)

GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
Chapter 7 - Diagnostics/Troubleshooting 7-11
PRELIMINARY
7-2-4 Diagnostic Test Window Menu Options
The Diagnostic Test menu includes the options described below.
7-2-4-1 Full System Test
NOTE: The Full System Test requires approximately 10 minutes for completion.
7-2-4-1-1 Full System Test (FE and BEP)
Performs a full sequence of complete Front End and Back End tests (automatically) that do not require
user intervention. This is particularly recommended for detecting problems that are intermittent in
nature, since a test may be paused at any stage and any detected failures reviewed.
For test procedure instructions, see the 7-3-1-1 "Full System Test (FE and BEP)" on page 7-22.