GE Vivid S6 N - 4-3-2-3 External USB Hard Disk Test

GE
P
ART NUMBER FN091065, REVISION 2 VS5 N AND VS6 N SERVICE MANUAL
4-34 Section 4-3 - Functional Checks
PRELIMINARY
4-3-2-3 External USB Hard Disk Test
NOTE: If the External USB Hard Disk is not currently connected to the system, refer to ‘External USB Hard
Disk Installation Procedure” on page 8-243 for configuration and connection instructions.
Table 4-16 External USB Hard Disk Test
Step Task Expected Result(s)
1
Check the External USB Hard Disk status light
indicators.
Refer to Figure 8-278 on page 8-244.
2
Create a dummy patient file on the Vivid S5 N or Vivid S6
N scanner. Save several images in the patient file.
3
Export the images to the External USB Hard Disk.
4
Delete the dummy patient file (including images) from
the Vivid S5 N or Vivid S6 N database.
The deleted patient file and images are no longer listed.
5
Import the dummy patient file and images from the
External USB Hard Disk.
The patient file is now listed in the Vivid S5 N or Vivid
S6 N database.
6
Open the patient file and check that the images are
available for review.
The newly-imported images are displayed correctly on
the Vivid S5 N/Vivid S6 N scanner.
7
Delete the dummy patient file (including images) from
the Vivid S5 N or Vivid S6 N database.
The deleted patient file and images are no longer listed.