View-X
Vivid S70 / S60 – User Manual 14-13
BC092760-1EN 01
View-X
View-X is an option that enables streaming from an external
video signal in a dedicated window on the system. The video
signal is received by means of multimedia streaming over the IP
network and without audio. For instructions to connect and set
up View-X, consult the documentation for the device itself and
the Service Manual.
Video streaming setup is described in ‘TCP/IP Configuration for
View-X’ on page 14-14.
View-X is available from the Imaging screen and toggles the
streaming window On/Off. When toggled On a dedicated
window showing the streamed video appears in the lower right
corner by default (Figure 14-6).
NOTE: Network connection quality may impact streaming quality. Under
ideal networking conditions a delay of approx. 1 sec will still
persist.
Figure 14-6. Scanning window with View-X on.
To Next Page
Loading...
