GE WCVH4800KWW - Service Mode and Diagnostics; Service Mode Operations and Selections

93
Copyright 2009
Service Mode
TO ENTER SERVICE MODE: Press (while unit is in idle):
Signal – Extra Rinse – Signal – Extra Rinse
TO EXIT SERVICE MODE: Press Power Button or no button pressed
for 15 minutes.
General Navigation
- Upon entering the service mode, the SSD shall display the first test
number t01.
- Rotating the knob counter-clockwise (CCW) decrement the test
number in the display.
- Rotating the knob clockwise (CW) increment the test number in the
display.
- Once the test number is selected, pressing Start/Pause will begin
the selected test.