– 57 –
Error Code Description Problem Possible Cause/Action
E67 Water
temperature
sensor shorted
Water
temperature
sensor shorted.
Check water temperature sensor - t07.
Check integrity of wiring and connections between
main control and water temperature sensor.
Check integrity of water temperature sensor -
replace if necessary.
•
•
•
E70 Stuck key Continuous
key read for 60
seconds.
Power down (unplug) machine, wait 30 seconds and
retry.
Use t04 test to test keys.
Separate control and control housing from front
panel - clean and remove foreign debris.
Ensure all keys can be operated freely without
sticking.
Replace control panel if actions do not resolve.
•
•
•
•
•
E71 Key fault Communication
error occurs
between
control and
keys.
Power down (unplug) washer, wait 30 seconds and
retry - if reoccurs, replace main control.
•
NOTE: It’s important to note error codes should only be used to help identify those components which
require testing. Never replace a part based solely on an error code. The control can generate a false error
if the right conditions exist. Use the code only as a reference and always check the component before
replacing.
To Next Page
Loading...
