GE ZISS480NXBSS

Design Guide
Refrigerator
Top View
90 ° DOOR SWING
(optional setting)
Scale 1:1
IMPORTANT NOTE -
FOR DISPENSER MODELS:
Dispenser models are supplied
with two dispenser trims, one to fit
framed panels and one for overlay
panels. Dispenser trim fit to the
custom panel depends on correct
panel thickness. Framed panels
must be 1/4" nominal. Overlay
panels should be constructed as
shown to accomplish (_total 1.100"
thickness. See pGges 7 Gnd 8 for
details.
Door
_Case _im
Frameless Cabinets:
The case trim overlaps
cabinets at the top
Gnd sides. Therefore,
frameless cabinets may
require filler strips to
prevent interference
with cabinet door swing.
The opening must GIIow
for filler strips.
23-7/8"
FromRearof
Refrkerator
i u u
i u u
u i i
u
i u
,.---, .... _---, ..... 1/2"
u
i u u
i i
' 3/4"
1-1/2"
3/4"Overlay
Panel
(NominalSize)
1-1/4"