GEA Grasso - 2 Start-Up; Operation of GSC; General Information; Description of the Grasso System Control; View

OPERATING INSTRUCTIONS
CO
2
/NH
3
CASCADE UNIT
250 - 1000 KW
_551511_om_kas_gbr_1_.doc 23
2 START-UP / OPERATION OF GSC
2.1 General Information
Warning!
Before switching on the CO
2
/NH cascade, carefully read through the operating instructions.
3
The operating instruction are an extract from the GSC User Manual, containing important
information for the operator about operating the CO
/NH cascade.
2 3
The listed items and annotation is not identical with those of the GSC Manual. The note [X.X.X.]
under the headings of these operating instructions refers to the corresponding chapter in the User
Manual.
For more specific information see GSC Manual or press the
key to obtain more information
about the relevant display text.
The GSC is supplied in the national language.
and the CO
A GSC is assigned both to the NH
3 2
circuit.
2.2 Description of the Grasso System Control
2.2.1 View
[Chapter 1.1.1. in user manual]
fig. 21: Exterior view GSC