Gecko Firmware V6.2
Welcome to the world of simplified seismic recording with your new Kelunji Gecko
seismograph. Within minutes you can be recording earthquakes, blasts and other ground
vibrations using our latest generation instrument that makes high dynamic range, high
sample rate, low power, continuous recording accessible to experts and novices alike.
In the Gecko, we have simplified the modern digital seismograph. The low cost of flash
memory means you can save weeks, months, even years of continuous data on a single
memory card. The Gecko can record everything continuously while logging trigger times for
you to sort through back at the lab. Even if your trigger settings missed the event, you’ll
always be able to retrieve that chunk of time from the continuous archive.
An even more efficient way of managing your data is not to have to collect it at all, so we
have included a simple telemetry protocol that streams data packets over the Internet via a
cellular data modem or Ethernet/WiFi link. Data from all of your stations is then available in
a single archive for you to access whenever you need it. Simply install our free “Streams”
data reception software on your Windows, Mac or Linux PC and watch your data live on
screen while it is archived away to your PC. Streams is ideal for collating data from multiple
network-connected structural monitoring instruments. Download it free today from the SRC
website: https://www.src.com.au/downloads/live-stream/
Our “Waves” waveform analysis application is available as a free download for Windows,
Mac and Linux from http://www.src.com.au/downloads/waves/ . Each Gecko purchased is
entitled to one Waves product key that will remove the advertisement that pops up for 10
seconds when you launch the program. You can email sales@src.com.au with your recorder
serial number to obtain a product key. Each product key can only be used once and is not
transferable to another computer.
Happy recording!
From the Gecko development team.
To Next Page
Loading...
Need help?
General
