14
5. Once the pairing is done select in.stream 2 and when
connected is displayed the in.stream 2 will be ready to
start playing the selected audio.
Note: If the device moves out of range and loses connection,
it should reconnect automatically as soon as it is close enough.
This should happen without having to go through the menu
again.
The in.stream 2 will keep up to 8 devices in its memory. If one of
the last three connected devices is in range and has its Bluetooth
turned on, it will automatically connects with in.stream 2.
If multiple devices are within range and have already been paired
with the in.stream 2, priority will be given to the device that was
first detected in the in.stream 2 memory.
Bluetooth overview
1. Open the Bluetooth settings on your device.
The location of the settings will depend on the device
you are using.
2. Make sure Bluetooth is on.
3. Select "in.stream 2" in the list of discoverable Bluetooth
devices detected nearby.
4. When prompted, enter 5555 as the PIN Code.
Pairing with a Bluetooth enabled device
The in.stream 2 can play music from any device equipped with Bluetooth wireless technologies, however, you must pair
your mobile device to the audio receiver in order to do so.
The system is ready to pair when it is not already connected to another device. To pair your device, make sure that you
are close enough to the in.stream 2, that it is turned on and that it is set in Bluetooth mode.
Note: In basic configuration (not connected to a keypad or controller), the in.stream 2 is set in Bluetooth mode. Otherwise, please refer
to your specific keypad operating manual for details on the in.stream 2 functions.
Follow these steps to pair your device
To Next Page
Loading...
Need help?
General
