Geeetech GT2560 User Manual

GEEETECH
www.geeetech.com Tel: +86 755 2658 4110 Fax: +86 755 2658 4074 -858
- 10 -
2. Subdivision on the base of Drv8825 stepper driving module:
2.4 Fan connection
As default, no matter the power supply is 12V or 24V; you need to connect the 12V fan as ther
e is a separate chip that can provide power supply for the fan. If you choose the 24V fan and 24V po
wer supply, you need to connect the JP2 with jumper cap. As shown in the picture.
Turn ON/OFF Subdivision
MS1 MS2 MS3
OFF OFF OFF full step
ON OFF OFF 1/2 step
OFF ON OFF 1/4 step
ON ON OFF 1/ 8 step
OFF OFF ON 1/16 step
ON OFF ON 1/32 step
OFF ON ON 1/32 step
ON ON ON 1/32 step
Turn ON/OFF Subdivision
MS1 MS2 MS3
OFF OFF OFF full step
ON OFF OFF 1/2 step
OFF ON OFF 1/4 step
ON ON OFF 1/ 8 step
ON ON ON 1/16 step

Geeetech GT2560 Specifications

General

Brand	Geeetech
Model	GT2560
Category	Controller
Language	English