4
1 - CONNECTING THE TELEPHONE
1. Connect the handset cord.
2. Open the battery compartment by pulling back
the latch.
3. Insert correctly 4 x AAA 1.5V alkaline batteries
(not supplied) in the battery compartment (*).
Batteries are required if you wish to increase
the ringer level up to 10 dB.
4. Snap the battery door back in place.
5. Connect the line cord to the socket (*).
(*) Classified TNV-3 according to EN60950 standard.
2 - RINGER SETTINGS
A switch located on the upper side allows the
ringer to be switched HI, LOW, OFF :
: Off,
: Low,
: Hi
Your phone comes with the ringer switched to
«High» and the melody set to «6»:
Low Mid High
Melody 1 1 2 3
Melody 2 4 5 6 (by default)
Melody 3 7 8 9
SETTING UP SETTING UP
To Next Page
Loading...
