19
Standby Mode
When the telephone is ready for use and you have not entered
any characters, the telephone is in standby mode. You can set
the telephone to standby mode by pressing
.
Making a Call
Flip open the cover and dial the number on the keypad.
Press Delete soft key to delete an incorrect digit
Press , the number is automatically dialled
To end the call simply press
To place an international call you need to press
+
before the
country code. Simply, press
*
key twice. Some foreign telephone
networks have extension lines that cannot be dialled as
dial-through, but need to be entered by the keypad. To dial
these directly, press
*
quickly three times in a row after the
telephone number. The p character will appear and then you
can enter the extension.
USING THE TELEPHONE
To Next Page
Loading...
