Need help?Do you have a question about the gefran BDI50-3055-KBX-4-NP-F and is the answer not in the manual?
General| Model | BDI50-3055-KBX-4-NP-F |
|---|---|
| Type | Inverter |
| Input Voltage | 380-480 VAC |
| Output Current | 55 A |
| Power | 30 kW |
| Protection Degree | IP20 |
| Cooling Method | Forced air |
| Altitude | Up to 1000 m without derating |
| Communication Interface | Modbus RTU |
| Humidity | 5% to 95% (non-condensing) |
Critical safety measures to follow before applying power to the inverter.
Safety guidelines for handling the inverter during the power-up sequence.
Pre-operation checks and safety considerations before starting the inverter.
Safety measures and precautions required while the inverter is running.
General rules and considerations for properly wiring the inverter and its components.
Key factors to consider for effective and safe inverter wiring.
Specific instructions for connecting power cables to the inverter terminals.
Guidance on selecting and wiring control cables to the inverter.
Best practices for wiring to ensure effective interference suppression and EMC compliance.
Proper procedures for establishing a secure and effective ground connection for the inverter.
Diagrams and instructions for common wiring configurations of the inverter.
Wiring diagram for single-phase inverters with NPN input.
Standard wiring diagram for single-phase inverters with PNP input configuration.
Standard wiring diagram for three-phase inverters with NPN input configuration.
Standard wiring diagram for three-phase inverters with PNP input configuration.
Wiring for three-phase inverters that support both NPN and PNP input types.
Lists common error codes, their causes, and recommended corrective actions.
Procedures for manually or automatically resetting inverter faults.
To Next Page