Need help?Do you have a question about the gefran BDI50 Series and is the answer not in the manual?
Introduction to the manual and contact information for assistance.
Safety instructions to follow before applying power to the inverter.
Safety instructions to follow while applying power to the inverter.
Safety instructions to follow before operating the inverter.
Safety instructions to follow during the inverter's operation.
Guidelines for the safe and proper disposal of the inverter.
Explanation of the inverter model part number structure and its components.
Table detailing standard product specifications and model variations.
Environmental conditions required for optimal inverter installation and operation.
Methods and considerations for installing the inverter.
General guidelines and best practices for wiring the inverter.
Detailed technical specifications for different inverter models.
Wiring diagrams illustrating various standard connection configurations.
Description of main and control circuit terminals on the inverter.
Dimensional drawings and weight specifications for different inverter sizes.
Procedure for disconnecting the built-in EMC filter if necessary.
Explanation of the operator panel keypad layout and button functions.
Listing and brief descriptions of the inverter's programmable parameter groups.
Detailed descriptions of inverter parameters organized by function group.
Table of error codes, their causes, and recommended corrective actions.
Common troubleshooting scenarios and their corresponding remedies.
Checklist for regular inspection and preventive maintenance of the inverter.
Guidelines for performing regular maintenance tasks on the inverter.
Specifications for input chokes, including model, current, and inductance.
Specifications for output chokes, including model, dimensions, and weight.
Recommended fuse specifications for different inverter models.
Fuse specifications that comply with UL standards.
Selection guide and specifications for suitable braking resistors.
Information on the Copy Unit for parameter transfer and remote keypad use.
Overview of available communication interface modules for the inverter.
Details of the RJ45 to USB cable for PC communication with the inverter.
General safety precautions required for UL compliance.
Information regarding UL certification and standards for the product.
Conditions to meet for continued compliance with UL standards.
Detailed description of the Modbus communication protocol.
Description of the BACnet communication protocol structure and services.
Model number and functional description of the RJ45 to USB cable.
Pin definitions for USB and RS485 connectors.
Important notices regarding cable connection and communication.
Lists available accessories for the BDI50 series.
To Next Page
General