Revision Date: 02/13/2015
Admin Information
Information entered in the Admin Info section of the Admin tab of the Configuration page will show
up at the bottom of the unit’s web interface.
Figure 14: Admin Information Configuration Section
Figure 15: Admin Information Display
Camera Configuration
Enter the domain names/IP addresses and models of up to four IP-addressable network cameras
in the Cameras section on the Configuration page. The unit will present a linked snapshot from
each camera on the Sensors page.
Figure 16: Cameras Configuration Section
Note: Each camera must be set to allow anonymous access to enable this feature.
To Next Page
Loading...
Need help?
General
