GEL DECAL - Water Sentinel Pro: Micro-Leakage OFF Setting; Water Sentinel Pro: Micro-Leakage ON Setting

ENGLISH
79
Softeners fitted with accessory Water Sentinel
Programming will automatically close and the main display is restored.
Softeners fitted with accessory Water Sentinel Pro
Programming carries on for setting the micro-leakage reading.
The display below will be shown
- press keys either to deactivate (= OFF) or activate (= ON) the micro-leakage reading by the
system Water Sentinel Pro.
13.13 - WATER SENTINEL PRO - STATUS OF THE MICRO-LEAKAGE = OFF
(reserved to Technical Assistance Service)
- Press key
to come back to the previous display, or
- Press key
to confirm the setting.
the display below will be shown
In this display it is not possible to modify any data,
- press key
to come back to the previous display, or
- press key
to confirm the setting.
Programming will automatically close and the main display is restored.
MICRO-LEAKAGE
STATUS = ON
TO CHANGE PRESS
+
or –
TO CONFIRM PRESS B
MICRO-LEAKAGE
TEST DURATION -- Sec
TO CHANGE PRESS
+
or –
TO CONFIRM PRESS B
24
25