10
MIDI Channel
RP60/70 is able to transmit MIDI messages on up to three channels, depend-
ing on the type of Preset recalled (single, layer or split). In reception, RP60/
70 can receive on all 16 MIDI channels.
The MIDI function allows you to modify the MIDI transmission channels of the
RP60/70, used by the RP60/70 to communicate with other MIDI devices
through a MIDI cable.
The Midi Channel function does not play a reference note during the setting
operation.
1. Press and hold the MIDI Channel function key (A7) and press the DATA m
button to increase the transmission channel by one unit.
Each time you press the DATA
m
button, the MIDI channel setting
increases by one unit.
Repeat the operations, making a mental note of how many times you
press the DATA
m
button with A7 pressed, until you obtain the required
channel number.
2. Press and hold the MIDI Channel function key (A7) and press the DATA n
button to decrease the channel setting by one unit.
Each time you press the DATA
n
button, the MIDI channel setting
decreases by one unit.
Resetting to the default MIDI channel configuration
3. If you are not sure on which transmission channels RP60/70 is currently
set, you can reset to the default channel settings (Ch 8, 7 and 6) by
holding down the MIDI Ch. function key (A7) and pressing both DATA m/
n buttons at the same time.
E7 F7 G7 A7 B7 C8
E7 F7 G7 A7 B7 C8
To Next Page
Loading...
Need help?
General
