Rev. 00 12/23
OptiSpray AP02 Maintenance / Repairs • 33
Reinigung
Cleaning
Cleaning the Application pump (color change)
For the preparation of a color change, the pump has to be rinsed.
The rinsing procedure can be started and stopped only externally
via control unit or plant control.
– The Application pump must be cleaned at least once per shift!
Periodic checks
The periodic checks include examining all connecting cables and hoses.
The corresponding parts should be replaced immediately if any damage
to cables or hoses is discovered.
All plugs must be properly tightened.
To Next Page
Loading...