GemOro 8
SPECIFICATIONS:
· Working Voltage: DC 9V (1) × 9V alkaline battery
(approximately 11.5 hours of continuous use).
· Warm-Up Stabilization Time: Approximately 3
seconds. For best results, allow 2-minutes before
performing initial calibration and test.
· Ideal Working Temperature: Room temperature
of 65F to 75F is best, although higher and lower
temperatures work just fine.
· Ideal Air Relative Humidity: 25% to 50%. As with
any electronics, do not use the AuRACLE AGT1 in
or around water.
· Net Weight: 128.5g (tester only).
CAUTION:
Disassembling the AGT1 other than opening the
battery compartment door for battery
replacement voids the warranty.
VIDEO OPERATIONAL INSTRUCTIONS:
Please go to www.auracletester.com or www.
gemoroproducts.com/goldtester640x480.mov
To Next Page
