Troubleshooting (cont.):
The Cym5 display is bright but the other cymbal displays are dim:
• The DCP is in Kit Preset mode. Press Cym5 Up and Down at the same time to exit Kit Preset mode.
The display is too bright or too dim:
• Adjust the display brightness via the Settings menu.
If you are experiencing other functionality issues, chances are your problem may already have been addressed
in a firmware update issued since purchasing your unit. Visit www.gen-16.com/support for information on the
latest firmware updates.
If you have checked your full signal path and things are still not functioning correctly, contact Gen16 Tech
Support for assistance. See the Contact Us section for contact information.
27
To Next Page
Loading...