EasyManua.ls Logo

Gen3 Verve - Specifications; Verve Scooter Specifications; Verve Pro Scooter Specifications

Gen3 Verve
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IMPORTANT SAFETY INSTRUCTIONS
WARNING - When using this product, basic precautions should always be followed, including the following:
a) Read all the instructions before using the product.
b) To reduce the risk of injury, close supervision is necessary when the product is used near children.
c) Do not put fingers or hands into the product.
d) Do not use this product if the flexible power cord or output cable is frayed, has broken insulation, or any other signs of damage.
e)
This equipment is not intended to be used at ambient temperatures less than -4°F (-20°C) or above ambient temperatures of 113°F (45°C).
f) The scooter battery is intended to be charged when the ambient temperature is between 32°F (0°C) and 104°F (40°C). Never charge
the scooter’s battery when ambient temperatures are outside this range.
g) CAUTION: Risk of Fire and Electric Shock – Only use this battery charger indoors. There are no user serviceable parts.
h)
Charging of the electric scooter should only be performed with the manufacturer’s charger model ELP1079 / XSL88-4200200.
BATTERY MAINTENANCE (continued)
The battery pack performs better at normal temperature, and poor when it is below 32°F (C). For instance, when it is below -4°F
(-20°C) , the riding range is only half or less at normal state. When the temperature rises, the riding range restores. For detailed
information, please refer to GEN3 Verve App.
Charge your scooter only indoors in a room near a smoke or fire detector. Do not charge in a bedroom.
In the unlikely event that the battery catches fire, DO NOT attempt to extinguish the fire with water. Instead, use sand or another fire
retardant to extinguish the fire.
Lithium Ion batteries are subject to many regulations and are often considered dangerous or hazardous materials by carriers. Be
sure to check for relevant laws and ask the carrier for approval prior to shipping your scooter containing a lithium-ion battery or
transporting it by air.
Note:
Allow up to 7 hours for your GEN3 Electric Scooter to fully charge. The scooter interface includes a built-in intelligent chip that will keep a
log of the battery’s charging and discharging records.
The damage caused by prolonged periods of time without charging the battery is irreversible and is beyond limited warranty. Once
the damage is done, the battery can not be recharged (non-professionals are forbidden to dismantle the battery pack, as it may
cause electric shock, short circuit or even major safety accidents).
16