LIST OF LOOSE PARTS & CONTENTS
CONTAINED IN THE SCOOTER BOX:
• Partially Assembled Scooter Frame
• Handlebar
• Accessories Box
• User Manual and Quick Start Guide
ASSEMBLY
Assemble your scooter:
Scan the QR Code
or go to
www.GEN3Ride.com
STEP 1 - FOLD STEM UP
Fold stem up and lock clamp into place. Put the
kickstand down.
STEP 2 - ATTACH HANDLEBAR
Attach the handlebar to the stem while making
sure wiring stays inside tube.
STEP 3 - TIGHTEN SCREWS
Tighten the screws onto all sides of the stem with
the hexagon wrench.
CONTAINED IN THE ACCESSORIES BOX:
• Screw x 4 (The Verve)
• Screw x 6 (The Verve Pro)
• Charging Adapter
• Hexagon Wrench
ASSEMBLY & SETUP
BOX OPENING:
•
Carefully remove scooter from box to avoid scratching the scooter or cutting the wiring.
•
Please do not dispose of the packaging until after the no-questions-asked return period has passed.
7
To Next Page
Loading...