Genadyne XLR8 - RF Emissions and Separation Distances; RF Emissions Compliance; RF Equipment Separation Distances

GenadyneBiotechnologies|EN(V5.0909.1) 25


TheGenadyneXLR8isintendedforuseintheelectromagneticenvironmentspecifiedbelow.Thecustomerortheuser
oftheGenadyneXLR8shouldassurethatitisusedinsuchanenvironment.
ImmunityTest IEC60601testlevel Compliancelevel

ConductedRF
IEC61000‐4‐6
RadiatedRF
IEC61000
‐4‐3


3Vrms
150kHzto80MHz
3V/m
80MHzto2.5GHz

3V

3V/m

Interferencemayoccurinthe
vicinityofequipmentmar ked
withthefollowingsymbol:

Note1:At80MHzand800MHz,thehigherfrequencyrangeapplies.
Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from
structures,objectsandpeople.

The Genadyne XLR8 is intended for use in an electromagnetic environment in which radiated RF disturbances are
controlled. The customer or the use r of the Genadyne XLR8 can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the
GenadyneXLR8as
recommendedbelow,accordingtothemaximumoutputpowerofthecommunicationsequipment.
Ratedmaximumoutput
poweroftransmitter
W
Separationdistanceaccor ding tofrequencyoftransmitter(m)
150kHzto80MHz 80MHzto800MHz 800MHzto2.5GHz
0.01 0.12m 0.12m 0.23m
0.1 0.37
m 0.37m 0.74m
1 1.17m 1.17m 2.33m
10 3.69m 3.69m 7.38m
100 11.67m 11.67m 23.33m