032-0207-EN Rev 0
Converter Board - Connectors and Jumpers
5-13
(Continued)
Table 5-4 Converter Board (part no. 124-0292) Connectors
Connector Description
J1 Line Voltage Configuration (P1 plugs into J1 for 120 or 230
V ac)
J3 HVDC Transformer Drive Output
J4 AC Input 120/230 V ac
J5 Filament Drive Output
J6 HV Feedback Input
J7 Control Board Interconnect
J8
Power Switch (not shown on
page 5-12)
Table 5-5 Converter Board (part no. 124-0292) Jumpers
Jumper Description
JP1 Neutral Fuse Jumper (must be present for hard-wired
installations of 220 V)
P1 Line Voltage Configuration Jumper (Plugs into J1 for 120 or
230 V ac)
To Next Page
Loading...
