Need help?Do you have a question about the Genelec 4020C and is the answer not in the manual?
General| Type | Active Studio Monitor |
|---|---|
| Configuration | 2-way |
| LF Amplifier Power | 50 W |
| HF Amplifier Power | 50 W |
| Amplifier Power | 100 W |
| Crossover Frequency | 3 kHz |
| HF Driver Size | 0.75 inches |
| Input Connectors | XLR |
| Enclosure Material | Aluminum |
| LF Driver Size | 5 inch |
Overview of the bi-amplified, compact, two-way active loudspeaker for fixed installations.
Guidance on placing the loudspeaker for optimal acoustic axis alignment.
Instructions for connecting audio input and power, with safety notes.
Description of the automatic power saving and resume function.
Adjusting the input sensitivity to match the signal source output.
Boosts treble response above 4 kHz for high-frequency loss compensation.
Attenuates bass response below 2 kHz for room boundary effects.
Activates a -4 dB filter for lowest bass frequencies (65 Hz) to compensate for heavy bass.
Aligning loudspeakers towards the center of the listening area for optimal acoustics.
Placing loudspeakers clear of reflective surfaces to avoid sound image blurring.
Ensuring sufficient space for cooling and reflex port function.
Details on threaded holes for stands, wall mounts, and brackets.
Service and repair must only be performed by qualified personnel.
Warnings and cautions for safe operation and maintaining conditions.
Product guarantee period and terms for faults in materials or workmanship.
Device compliance with FCC rules and conditions for operation.
Detailed technical data including frequency response, drivers, and dimensions.
Specifications for input connector, crossover frequency, and tone control ranges.
Details on amplifier output power, distortion, mains voltage, and power consumption.
To Next Page
