Need help?Do you have a question about the Genelec 4020B and is the answer not in the manual?
Details on the correct placement of the loudspeaker for optimal acoustic axis alignment.
Instructions for connecting the loudspeaker to power and audio sources, including trigger voltage.
Explanation of the automatic Standby mode based on signal detection and remote control functionality.
Guidance on matching the loudspeaker's input sensitivity to the audio source output.
Details on adjusting frequency response using Treble Tilt, Bass Tilt, and Bass Roll-Off controls.
Explains the Treble Tilt control for attenuating high frequencies by 2 dB above 5 kHz.
Describes the Bass Tilt control for attenuating bass response by -2, -4, or -6 dB.
Explains the Bass Roll-Off switch for activating high-pass filtering at 85 Hz.
Key considerations for optimal loudspeaker placement and minimizing acoustic issues.
Details on available mounting options, including microphone stands and Omnimount.
Guidance on servicing and repair procedures for the loudspeaker unit.
Covers servicing, electrical, water, hearing, and cooling safety guidelines for safe operation.
Information regarding the two-year warranty against faults in materials or workmanship.
Details on compliance with FCC rules and potential interference management.
Details on the crossover frequency, tone control ranges, and input specifications.
Information on amplifier output power, distortion, signal-to-noise ratio, and power consumption.
To Next Page
General
