7200 DSP Subwoofers
To complement the 8200 DSP bi-amp systems, Genelec has provided three robust
DSP subwoofers. Built upon the proven LSE™ (Laminar Spiral Enclosure™)
technology of our 7000 Series, the 7260A, 7270A and 7271A deliver the same
articulate and impressive acoustic performance.
The 7200 subwoofers provide the cornerstone for those control room environments
that are equipped with fully digital monitor/buss outputs, with connectivity via
its four AES/EBU digital inputs and outputs. All standard 7000 series functions
are available when used in Stand Alone mode, and if connected to the network
through GLM™ software, additional powerful resources become available. When
coupled with AutoCal™, Genelec’s automated self-calibration algorithm, enhanced
acoustic integration is provided for every loudspeaker in virtually any control room
environment.
These DSP systems are, by design, complex yet straightforward and easy to use,
versatile in configuration and adaptable acoustically to nearly any environment you
place them in, to provide outstanding clarity and definition with a naturalness that you
can immediately trust. And with respect to our customers most valuable asset – time,
these systems are up and running quickly and effectively.
7260A
7270A
SPL short term RMS
half space at 1 m 108 dB
Drivers 10”
Frequency response 19-100 Hz ± 3 dB
Amplifier power 120 W
Dimensions H x W x D 527 x 462 x 363 mm
(20
3
/
4
x 18
3
/
16
x 14
5
/
16
”)
Weight 27 kg (59 lb)
Recommended use with
main monitors 8240A (stereo)
Order code 7260APM
SPL short term RMS
half space at 1 m 112 dB
Drivers 12”
Frequency response 19-100 Hz ± 3 dB
Amplifier power 250 W
Dimensions H x W x D 625 x 555 x 490 mm
(24
5
/
8
x 21
7
/
8
x 19
5
/
16
”)
Weight 51 kg (112 lb)
Recommended use with
main monitors 8250A (stereo) and 8240A (surround)
Order code 7270APM
GLM
dsp
AutoCa
l
TM
To Next Page
Loading...
