Genelec PowerPak - Page 26

26
www.genelec.com
www.genelec.com
Accessories for Three-Way Monitors and Main Monitors
Main monitor enclosure and DCW
TM
orientation codes
Each main monitor should be ordered with
appropriate enclosure and DCW
TM
orientation.
Each product has multiple order code extensions
that specify (V) for vertical enclosure or (H)
horizontal, with the DCW
TM
(U) up or (D) down, (L)
left or (R) right. For 1038BC and 1034BC, (L) and
(R) stand for ports left or ports right.
Always remember to check the required speaker-
amplifier cable length. Default factory cable length
is 10 m, other lengths available as an option.
Orientation order codes for 1034B,
1039A, 1035B and 1036A
Orientation order codes for
1038BC and 1034BC
1036A-VU
1034BCM-VL
1036A-HR
1036A-HL
1036A-VD
1034BCM-VR
1034BCM-HU
1034BCM-HD
Accessories for Subwoofers
Remote power/over
load LED - 5 m cable
Remote control for
bypass/LFE +10 dB - 5 m cable
Grille - black
Magnetic shielding
1037C 1038B / BC 1034B / BC 1039A 1035B 1036A
Description of accessories Order code Order code Order code Order code Order code Order code
Wall mount - black
1037-404
Magnetic shielding
1034-403B
(only for 1034B)
1039-403
Grille - black
1037-409 1038-409 / 409BC 1034-409B / 409BC 1039-409 1035-409 1036-409
Amplifier rack mount
adapter
1037-412
1038-421
(only for 1038B)
Cable harness - 2 m
1039-203 1039-203 1039-203 1039-203
Cable harness - 5 m
1039-204 1039-204 1039-204 1039-204 1035-204 1035-204
Cable harness - 10 m
1039-205 1039-205 1039-205 1039-205 1035-205 1035-205
Cable harness - 15 m
1039-206 1039-206 1039-206 1039-206 1035-206 1035-206
Cable harness - 20 m
1039-207 1039-207 1039-207 1039-207 1035-207 1035-207
Cable harness - 25 m
1035-208 1035-208
Cable harness - 30 m
1035-209 1035-209
7060A 7070A 7071A 7073A
Description of accessories Order code Order code Order code Order code
Remote bypass switch - 1/4” jack
1092-400 1092-400 1092-400 1092-400
Remote power/overload LED - 5 m cable
7000-415 7000-415 7000-415 7000-415
Remote control for bypass/LFE +10 dB - 5 m cable
7000-416 7000-416 7000-416 7000-416
1032A
Description of accessories Order code
Magnetic shield upgrade kit
1032-403
Grille - black
1032-409
Amplifier rack mount adapter
1037-412
Cable harness - 2 m
1039-203
Cable harness - 5 m
1039-204
Cable harness - 10 m
1039-205
Cable harness - 15 m
1039-206
Cable harness - 20 m
1039-207
Accessories for 1032A
Grille - black
Cable harness
Amplifier rack mount adapter
These accessories can also be used with 7200 Subwoofers