Registration
12 Installation and User’s Manual for Mobile Link
Section 4: Registration
Once the Mobile Link cellular unit has been
installed, it should be registered and activated
to obtain full benefits of product capabilities.
Gather the following information prior to
initiating registration process:
• E-mail address
• Mobile Directory Number (MDN) (located
on bottom of Mobile Link cellular unit or
product box)
• Mobile Equipment Identification Number
(MEID) (located on Mobile Link cellular
product box)
• Generator serial number (located on label
plate, near control panel console)
• Mailing address
• Valid credit card
• Address of generator location (if different
than mailing address)
Go to www.MobileLinkGen.com to complete
the registration process. The welcome screen
is shown in Figure 4-1.
1. Click “Sign Up” (A).
2. Enter requested information when
prompted, then click “Sign Up.”
3. Enter requested generator enrollment
information when prompted, then click
“Enroll.”
NOTE: The MDN can be found on the bottom
of the device or on the device packaging. The
serial number is located on or in the area of
the control panel.
4. Select the types of alerts to receive, how
often to receive them, and whether the
alerts should be sent as text messages, e-
mail messages, or both.
Figure 4-1. Mobile Link Cellular Information Screen
•Text alert settings can be configured to
deliver notifications of any or all changes
in generator status.
•Status changes include such events as
faults, warnings, exercise confirmations,
or maintenance reminders.
5. An enrollment summary screen appears.
Select “Submit” to continue.
To Next Page
Loading...
Need help?
General
