Need help?Do you have a question about the Generac Power Systems PWRview and is the answer not in the manual?
General| Brand | Generac Power Systems |
|---|---|
| Model | PWRview |
| Category | Measuring Instruments |
| Language | English |
Overview of the PWRview installation and its purpose.
Download and register on the PWRview Installer App for installation.
List of all components and accessories provided with the PWRview system.
Turn off the main breaker and remove the panel cover to access the electrical panel.
Secure the mounting plate for the PWRview device in an empty space within the panel.
Connect the voltage cable's wires to the appropriate circuit breaker and neutral bus bar.
Clamp the Current Transformers around the main power lines, ensuring correct orientation and phase.
Prepare and install the antenna through a knockout in the panel enclosure.
Connect the antenna cable, CTs, and voltage cable to the PWRview device.
Verify all PWRview connections are properly made and secure before proceeding.
Use the PWRview Installer App on your smartphone to complete the installation process.
Screw the panel cover back onto the electrical panel and place the breaker label.
To Next Page
