32
The remote is preset to work with the GT-3.0 when the “GT-3.0”
button is pressed first.
The remote is also capable of learning “TV”, “Cable” and “Satel-
lite” functions using the following instructions.
It is advised that you read steps 1, 2 and 3 before attempting to
program functions.
To Learn TV Functions do the following:
1. Point the top of GT-3.0 remote 2 to 3 inches from the top of
the TV remote.
2. Press and hold the “TV” button on the GT-3.0 remote for 3
seconds and release when the “EJECT” button in the upper left
corner lights red. This puts the remote in learning mode.
Note: Eject will remain lit for only 10 seconds, after which the
remote returns back to normal.
Reminder: The GT-3.0 remote will learn only one function at a
time.
REMOTE MEMORIZATION
ZX800
TV
SAT
DISPLAY
USB/SD RADIO INPUT
BAND
A
VOL +
SUB-T
C
100+
B
DISC
ZOOM
CABLE
PLAY/PAUSE STOPMUTE/BC
SLEEPSOUND
FF NEXT
RETURN
REPEAT
AUDIO
VOL-
PREVIOUS
SLOW
SETUP
FR
ENTER
CHANNEL
MENU
PROG
EJECT
CLOCK
2”- 3”
GT-3.0 REMOTE
TV REMOTE
To Next Page
Loading...