Vehicle Information, Consumer Information and Reporting Safety Defects
2-12
To help achieve proper engine and powertrain performance and durability, use only 
lubricants of the proper quality. The correct lubricants also help promote engine 
efficiency that results in improved fuel economy.
These lubricants and fluids are recommended for use in your vehicle.
Lubricant Volume Classification
Engine oil 
*1
 
Recommends
2.5L T-GDI 6.5 US qt. (6.2 ℓ)
SAE 0W-30, API SN PLUS/
SP or ILSAC GF-6 
*4
3.5L T-GDI 7.4 US qt. (7.0 ℓ)
Automatic transmission fluid
9.7 US qt. (9.2 ℓ)
GS ATF SP-IV-RR, Genesis/
HYUNDAI genuine ATF 
SP-IV-RR or other brands 
meeting the above 
specification approved by 
Genesis Customer Care
Engine coolant
2.5L T-GDI 10.1 US qt. (9.6 ℓ)
Mixture of antifreeze and 
water (Phosphate-based 
Ethylene glycol coolant for 
aluminum radiator)
3.5L T-GDI 11.6 US qt. (11 ℓ)
Liquid-cooled 
intercooler 
coolant
2.5L T-GDI 4.1 US qt. (3.9 ℓ)
3.5L T-GDI 4 US qt. (3.8 ℓ)
Brake fluid 
*2
As required DOT-4
Front differential oil (AWD) 
*3
0.71±0.026 US qt.
(0.67±0.025 ℓ)
HYPOID GEAR OIL API GL-5 
SAE 75W/85 
(SK HK SYN GEAR OIL 
75W85 or equivalent)
Rear differential oil 
*3
1.27±0.05 US qt. 
(1.2±0.05 ℓ)
Transfer case oil (AWD)
1.11±0.022 US qt. 
(1.05±0.021 ℓ)
FUCHS ATF 134 MPT
Fuel
2.5L T-GDI
21.9 US gal. (65 ℓ)
Refer to “Fuel 
requirements” in chapter 1.
3.5L T-GDI
19.3 US gal. (73 ℓ)
*1 : 
Refer to the recommended SAE viscosity numbers on the next page.
*2 : 
To maintain the best braking performance and ABS/ESC performance, we recommend 
that you use fluid that conform to specifications.
*3 : 
If the front/rear differential is submerged, visit an authorized retailer of Genesis Branded 
products to replace the differential oil.
*4 : 
If the above recommended specification oil is not available, SAE 0W-30 grade synthetic 
oil can be used. If mineral oil or semi-synthetic oil is used, it is a severe maintenance 
condition in terms of engine oil change
RECOMMENDED LUBRICANTS AND CAPACITIES