09
9-45
Engine Compartment Panel Fuse 
Replacement
Blade fuse / Cartridge fuse
 Blade type fuse
ORG3090026
 Cartridge type fuse
ORG3090027
1.  Turn the vehicle off.
2.  Turn all other switches off.
3.  Remove the fuse panel cover by 
pressing the tap and pulling up.
4.  Check the removed fuse; replace it 
if it is blown. To remove or insert the 
fuse, use the fuse puller in the engine 
compartment fuse panel.
5.  Push in a new fuse of the same 
rating, and make sure it fits tightly in 
the clips. If it fits loosely, consult an 
authorized retailer of Genesis Branded 
products.
NOTICE
After checking the fuse panel in the 
engine compartment, securely install 
the fuse panel cover. You may hear a 
clicking sound if the cover is securely 
latched. If it is not securely latched, 
electrical failure may occur from water 
contact.
Multi fuse / Midi fuse
 Multi type
ORG3090028
 Midi type
ORG3090029
If the multi fuse or midi fuse is blown, 
consult an authorized retailer of Genesis 
Branded products.