5
English
Guidelines for Using Extension Cords
SPECIFIC SAFETY RULES FOR CIRCULAR SAWS
WARNING: DO NOT LET COMFORT OR FAMILIARITY WITH PRODUCT
(GAINED FROM REPEATED USE) REPLACE STRICT ADHERENCE TO PRODUCT SAFETY
RULES. If you use this tool unsafe or incorrectly, you can suffer serious personal injury!
•
Hold the tool by insulated gripping surfaces
•
DANGER! Keep hands away from cutting area and blade.
CAUTION:
•
Check lower guard for proper closing before each use.
•
Check the operation and condition of the lower guard spring.
•
Lower guard should be retracted manually only for special cuts
•
Always observe that the lower guard is covering the blade
•
NEVER hold piece being cut in your hands or across your leg
Recommended Minimum Wire Gauge for Extension Cords (120 Volt)
Nameplate
Amperes
(At Full Load)
Extension Cord Length
25 Feet 50 Feet 75 Feet 100 Feet 150 Feet 200 Feet
0–2.0
2.1–3.4
3.5–5.0
5.1–7.0
7.1–12.0
12.1–16.0
16.1–20.0