Genesis GMS15LB - Miter Saw Operation and Safety; Motor and Blade Safety; Cutting Procedures

English
10" Compound Laser Miter Saw
Operator’s Manual GMS15LB
 Keep the motor air slots clean and free of chips


Make sure all the saw’s adjustment handles are tight


Never apply lubricants 

Never use saw blades

Never start the tool 

Allow the motor 

Always keep the blade guards

Never reach around

Never lock the switch

Never attempt to recut small pieces.
 Never cut ferrous metals or masonry. 

Do not perform free-hand cutting operations


Long or wide work pieces should be properly supported.
 IMPORTANT:After completing the cut


Turn off the saw and allow the blade


Turn off the saw and allow the blade


Never perform layout, 

Turn the machine “off” and disconnect the machine


Disconnect the machine 

If any part of your miter saw is missing, damaged,

WARNING:
READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND OPERATING INSTRUCTIONS BEFORE USING THIS
EQUIPMENT. Failure to follow all instructions listed below may result in electric shock, fire and/or serious
personal injury.
SAVE THESE INSTRUCTIONS