6.0 Scuba Mode
6.1 Scuba Mode - From Initial Time Screen Press: Mode Selector Button > Diving >
Fig#13
> Scuba – (Figures #14, #15 & #16):
Scuba Diving Mode – Surface Screen Examples (After pressing Mode Selector on “Scuba”)
Battery Icon on top indicates the Battery Charge remaining
SC: Graviton abbreviation for Scuba
CF2: Indicates the default Conservative Factor the Graviton algorithm is set as.
The CF value can be set to:
CF1 – Most Conservative, CF2 – Balanced Conservative, CF3 – Least Conservative
21% O2%: Indicates the oxygen percentage content in breathing gas. By default, is set to 21%. Change in Settings
1.4 PO2 Indicates the CNS Oxygen Toxicity value. 1.4 is the default setting.
65 °: The compass heading (direction) the watch is pointing at.
MOD: Maximum Operating Depth. Allowable depth based on Oxygen percentage content in Breathing Gas & the PO2 value. The
maximum depth indicated by the MOD must not be exceeded.
O2%: The oxygen concentration value of the gas used.
SI: Current Surface Interval in hours the diver has remained at the surface, more than 24 hours Graviton will show: - -
185ft: MOD considering the O2% Breathing Gas & the PO2 value | TISS%: Nitrogen saturation % in tissues.
SI
- -
21
CF2
185ft
PO2
1.4
sc
O2%
%