4.0 Settings Quick How-To & Menu Screens
Quick How To:
To access the different menus, sub-menus, and the settings within a particular sub-menu, please follow the same simple
& easy sequence principle. This principle applies to all menus, sub-menus & all options within each section.
Use the Mode Selector button to move to the different Menus the Graviton features; the UP or DOWN buttons to toggle
up or down through the different options, and the Mode Selector button again to “select & accept” a value.
Once a particular value has been found within a submenu (after locating it with the UP/DOWN buttons), example: Units
from Metric (M/C) to Imperial (FT/F), press the Mode Selector one last time & the watch will revert to the previous
screen. This “jump back” is the indication that the change has been accepted. No other button has to be pressed to
accept the value. To go back, use the Power Button, one short press at the time, to return to the initial time screen. The
watch will now have the new selected value.
If there are additional options within a particular selection, pressing the Mode Selector will move to additional screens
where you can change values again using the UP & DOWN buttons & select and accept using the Mode Selector button
again.
INITIAL MENU SCREEN
Press the Mode Selector button once to access the Initial Menu Screen. This screen contains the following options:
Fig#2
• Diving
• Settings
• Logs
• Timer
To access each submenu, you can scroll up or down using the Up or Down buttons & to select press Mode Selector.
Diving:
• Scuba - Puts the computer in Scuba Diving mode showing the Scuba surface screen
• Free - Puts the computer in Free Diving mode showing the Free Diving surface screen
• Gauge - Sets the computer in Gauge mode showing the Gauge surface screen
• Plan - Goes to Plan mode. Use the UP & DOWN buttons to scroll different Depth/Time options.
To Next Page
Loading...