Genesis GRAVITON - Page 10

10
10
Settings
The Settings Sub-Menu gives access to the following:
• Set Dive options:
o Scuba
 Set Gas – Sets Oxygen value 21%-99% | PO2 values 1.0 – 1.8 & provides the MOD
 CF – Sets Conservative Factor
• CF1 Most Conservative
• CF2 Balanced Conservative
• CF3 Least Conservative
 Sdepth-Alarm – Sets a Maximum Depth alarm
 Stime -Alarm – Sets a Maximum Elapsed Dive-Time alarm
 Sampling – Performs Data Sampling every 10, 20, 30 or 60 seconds for Profile Graph
 Log Stop – Stops the log at 1, 2, 5 or 10 minutes
o Free
 Fdepth-Alarm: Selects Max Depth Alarm
 Ftime-Alarm: Selects Maximum Time Alarms
 FSI-Alarm: Selects Surface Interval Alarms
o Auto Mode (Selects different modalities the watch will go automatically & activation depth for each)
 SCUBA
 FREE DIVE
 GAUGE
o Salinity
 Salt water
 Fresh water
o Twist to Next
 By quickly twisting wrist in Scuba Mode the bottom section of the screen changes from SI/MOD
to a fraction of the compass & again from compass to Tissue % Loading & then back to SI/MOD
• Set System options:
o GNSS Global Navigation Satellite Systems
o Backlight Backlight options
 Brightness Press Mode Selector & Up/Down to change values
 Duration Press Mode Selector & Up/Down to change values
o Buzzer Turns Buzzer ON or OFF
o Vibration Turns Vibration ON or OFF
o Time Access the 5 different Time submenus:
 UTC Universal Time Coordinated |Time standard commonly used across the world
 Format Changes the Date Format: YY.MM.DD | DD.MM.YY | MM.DD.YY
 DTS Daylight Time Savings ON or OFF
 Set Time Sets the Time of Day using GNSS
 24H/12H Changes the Hour Format from 12h to 24h versions
o Alarm Clock
 Sets different Alarm Clock options, Press Mode Selector & the Up/Down buttons to change
values: OFF/ON | One Time | Weekday | Daily