Genesis GRAVITON - Page 11

11
11
o Language – 3 different options:
 English
 Chinese
 Spanish
o Units - Sets the Distance (depth) & Temperature options:
 M/C = meters & degrees ° Celsius
 FT/F = Feet & degrees ° Fahrenheit
o Watch PSM - Power Savings Management
 Auto Backlight ON (uses more battery) or OFF (uses less battery)
o Compass CAL Compass Calibration
 Shows image on how to rotate watch, press Mode Selector to start calibration.
o Watch Face
 Gives two options for watch face displays, UP or DOWN to locate, Mode Selector to select &
accept the option
o USB
 Turns the PC watch access via USB cable ON or OFF
• Delete option:
o Access two options YES or NO to Delete all logs & previous Settings information from the watch
• Reset option:
o Shows: System Reset. Press the Mode Selector button to reset the watch system entirely
• About option:
o Shows a screen with
 GENESIS Watch’s Brand
 SN: GE5Bxxxxxxxx Model + Serial Number
 VER: GE50xx Watch’s Firmware Version
 EPO: Watch’s EPO
Logs:
• Diving information stored inside the watch. Press Mode Selector to access a Dive Profile graph
Timer:
• Countdown
o 00:00 to 99:00 Mode Selector to make digits blink, UP or DOWN to change & Mode Selector to accept
o Starts the countdown
o Repeat (Select ON or OFF)
• Stopwatch
o Mode Selector to Start, Pause, Done, Continue
o Power button to go to Lap
• Alarm Clock
o Access to the Alarm Clock (This function can also be accessed/edited on Settings > Set System > Time)