Genesis GRAVITON - Free Diving Alarms

29
29
7.2 Free Diving Alarms
Free Diving Maximum Depth Alarm
Once in this option, Alarm 1 “ON” will be flashing. Press Mode Selector
to agree w/ ON or up/down buttons to turn it OFF. If ON is selected,
press Mode Selector to go to depth options, the depth value will be
flashing. Use Up/Down to change values & press Mode Selector again
to confirm & accept. The depth value will stop flashing after the
selection.
Use the same protocol to edit the depth values of Alarm 2 & Alarm 3.
The settings are the same.
Free Diving Maximum Time Alarm (seconds)
Once in this option, Alarm 1 “ON” will be flashing. Press Mode
Selector to agree w/ ON or up/down buttons to turn it OFF. If ON is
selected, press Mode Selector to go to time options, the time value
will be flashing. Use Up/Down to change values & press Mode
Selector again to confirm & accept. The time value will stop flashing
after the selection.
Use the same protocol to edit the time values of Alarm 2 & Alarm 3.
The settings are the same.
Free Diving Maximum Time Alarm (minutes)
Once in this option, Alarm 1 “ON” will be flashing. Press Mode Selector
to agree w/ ON or up/down buttons to turn it OFF. If ON is selected,
press Mode Selector to go to time options, the time value will be
flashing. Use Up/Down to change values & press Mode Selector again to
confirm & accept. The time value will stop flashing after the selection.
Use the same protocol to edit the time values of Alarm 2 & Alarm 3. The
settings are the same.
10
ft
Alarm
1
ON
10
SEC
Alarm 1
ON
1
MIN
Alarm
1
ON