Genesis GRAVITON - Gauge Mode

30
30
8.0 Gauge Mode
NOTE: The Gauge Mode is only a bottom timer, it will only indicate the depth/time information during a dive. It will not
provide NDL, & will not store nitrogen absorption/release or Nitrox calculations. Do not use it as if it was a dive
computer.
NOTE: It is not necessary to press any of the buttons on your Graviton computer while underwater. The screen will
be locked for the duration of the dive.
To access: From main Watch Mode, press the Mode Selector > Diving > Up or Down buttons until Gauge appears in the
center of the screen. Press Mode Selector one more time to access the Gauge mode and view the screen information.
Additionally, you can use the “Twist to Next” (Set Dive Page 10) function to access a small section of the compass at the
bottom of the screen.
Battery Icon indicating charge level
GA: An abbreviation for instrument diving mode.
AVG: The average depth
STPW: Dive Time in the current stage
SI: Surface Interval
TEMP: Water temperature
Use Twist to Next to access compass
Example of a typical Gauge screen view while underwater:
Battery Icon displayed
Current Depth displayed
AVG: Average Depth
STWP: Stopwatch (immersion’s elapsed dive time)
TIME: Current time of the day
TEMP: Water Temperature
Gauge
Plan
SI
20
000
TEMP
082
GA
STPW
AVG
ft
00:00
℉
000
GA
STPW
AVG
ft
00:
00
47°
TIME
09:28
052
T
EMP
082
146
STPW
AVG
ft
ft
03:24
℉