Need help?Do you have a question about the Genesis GXP Series and is the answer not in the manual?
General| Brand | Genesis |
|---|---|
| Model | GXP Series |
| Category | Industrial Equipment |
| Language | English |
Instructions for safely connecting the ground clamp during welding operations.
Procedures and precautions to follow before, during, and after welding.
Steps to prepare the jaw surfaces for the Jaw Armor application.
Critical temperature requirements and methods for pre-heating parent material before welding.
Importance of post-heating for relieving internal stress and slowing the cooling process.
Illustrates dimensions and welding sizes for the Jaw Armor components from a side perspective.
Depicts dimensions and welding sizes for the Jaw Armor components from a front perspective.
Provides close-up views of specific areas showing dimensions and welding details.
Steps for positioning and tack welding Items 3 and 4 on the chin front and top.
Guidance on setting Item 1 onto the lower blade side and tack welding it.
Instructions for positioning and tack welding Items 2 and 5 onto the lower guide side and seat.
Procedure for placing and tack welding Item 6 at the bottom of the upper jaw.
Steps for positioning and tack welding Item 7 onto the top of the upper jaw.
To Next Page
