Genesis GXP Series - Lower Blade Side

© 2016 Genesis Attachments, LLC
Genesis GXP Jaw Armor
16
SET-UP AND TACK PROCEDURE
A
Lower Blade Side
Set Item 1 onto the lower blade side, hold the offset dimension (See Figure 16d). Clamp down ush
with the prole and tack weld into position.
1
1
A
A
(
Figure 16a
A
A
No weld here
D
Figure 16b
Figure 16c
Figure 16d
Adjustable
square
Extend welds 1.50” past the Jaw Armor. Then
grind weld ends smooth and taper to parent
metal.