Need help?Do you have a question about the Genexis DRG 7000-Series and is the answer not in the manual?
The WPS button is located on the side of your DRG and enables easy configuration with other wireless devices.
The reset button is located on the side of your DRG, allowing for a reset or factory reset using a small pin or paperclip.
The power button is located on the bottom of your DRG and is used to turn the device on or off.
If present, remove dust caps from fiber connector(s) on your DRG. The number of connectors varies by model.
If present, remove dust caps from the FTU connector(s). The number of connectors varies by exact model.
Open a web-browser to check if the web page loads, indicating a working connection.
Ensure your computer network settings are set to: Use IPv4, Obtain IP address automatically (DHCP), Obtain DNS server(s) automatically.
General| Category | Gateway |
|---|---|
| Model | DRG 7000-Series |
| Number of LAN Ports | 4 |
| VoIP | Yes |
| Power Supply | External |
| Power Supply Voltage | 12V DC |
| LAN Interface | Ethernet |
| Ethernet Ports | 4 x 10/100/1000 Mbps |
| VoIP FXS | 2 |
To Next Page
